RESOURCE LIBRARY

50 multiple choice questions randomly selected from a bank of 200. In this version, the majority of correct responses should be obvious. Versions B and C will be incrementally more challenging. 30-41 correct for a Pass, 42 or more for a Distinction.

50 correctly spelt construction words, each with two incorrect distractors. How many of the correctly spelt words can you identify? There are 50 and you have 60 seconds.

Options for calculating brick and block quantities in square, rectangular and gable walls, up to 4 walls and 4 openings. Select the option and enter measurements in metres and millimetres. Brick option also for half brick and one brick walls.

A simple tool to determine an angle, particularly useful when calculating the angle of rake on a gable or boundary wall. Ensure the horizontal and vertical lines are at 90 degrees to each other, and measure back from the right angle to the line of rake.

Enter the angle of the raking cut (maximum of 68 degrees) to calculate the measurement to the top of each symmetrical mitre. This calculator assumes the bed of the mitred brick will remain at 65mm.

15 questions each containing a series of THREE images. Your challenge is to identify the ODD ONE OUT in each of the series. You only have 60 seconds so push on.

10 roofing images with names will scroll across your screen. You will then have 30 seconds to correctly identify those you saw from a list of 20. (Green = correct, Red = Incorrect)

Each of the 30 images contains a H&S acronym. Identify the correct name from two options, but don't hang about, you have 60 seconds to complete.

10 images of drainage components (drawn randomly from a bank of 20) will scroll across the screen. Concentrate as they cross the screen, once 10 have been viewed, you will have 30 seconds to remember them and select the correct 10 names. Buttons will turn green if correct, red if you have selected a component that was not seen.

Enter the measurements for wall length A and wall length B to determine length C. Then check A, B & C to ensure you have set out a 90 degree corner / building.

10 brick images from the Wienerberger 65mm extruded range, randomly selected from a bank of 20 Wienerberger brick images, will scroll across your screen. You will then have 30 seconds to correctly identify the names of the 10 Wienerberger bricks you saw. (Green = correct, Red = Incorrect)

10 NAMED BRICK IMAGES from the Wienerberger 65mm extruded range, randomly selected from a bank of 20 Wienerberger brick images, will scroll across your screen. You will then have 30 seconds to correctly identify the 10 Wienerberger bricks you saw. (Green = correct, Red = Incorrect)

10 tools will be randomly selected from a bank of 20 and scroll across your screen in 20 seconds. You will then have 30 seconds to correctly identify the 10 tools you saw. Click on a tool name to select. Green correct, Red incorrect

20 decorative brickwork features to identify in just 40 seconds. Press start to begin the countdown. Good luck

This fun and very quick identification activity requires you to correctly name 16 brick specials in 30 seconds. Press Start to begin and see the first image.

You go first each game, Four in a row in any direction wins. Press reset to start again Questions kindly provided by Stuart Spiteri-Nobbs